Bio-Rad Econo Gradient Pump Kits - Manual (Page 33)

Model 1327 Chart Recorder (continued)
If PAUSE is selected during the program, then the
pump and chart recorder will stop.
The pump and chart recorder will resume when
CONTINUE is selected.
Model EM-1 UV Monitor
None A connection is not required between the pump and
the EM-1 UV Monitor. To record UV data onto the
Model 1327 Chart Recorder, use cable #4, 8-pin
mini-DIN to banana plug cable. It is supplied with the
UV Monitor. The banana plugs plug into Channel 1 of
the chart recorder. The UV trace will be displayed by
the blue pen.
Model EG-1 Gradient Monitor
None A connection is not required between the pump and
the EG-1 Gradient Monitor. To record the gradient
data onto the Model 1327 Chart Recorder, use cable
#4, 8-pin mini-DIN to banana plug cable. It is
supplied with the Gradient Monitor. The banana
plugs plug into Channel 2 of the chart recorder. The
gradient trace will be displayed by the red pen.
Other Instruments
29
4006161B.qxd 8/14/2003 8:09 AM Page 29