Bio-Rad Foresight™ Chromatography Columns, Prepacked - Manual (Page 38)

Technical Support: 1-800-424-6723 • www.bio-rad.com 33
Section 6
References
1. Bensch M et al. (2005). High throughput screening of
chromatographic phases for rapid process development. Chem Eng
Technol 28, 1274–1284.
2. Coffman JL et al. (2008). High-throughput screening of
chromatographic separations: I. method development and column
modeling. Biotechnol Bioeng 100, 605–618.
3. Nfor BK et al. (2010). High-throughput isotherm determination and
thermodynamic modeling of protein adsorption on mixed mode
adsorbents. J Chromatogr A 1217, 6829–6850.
4. Chhatre S and Titchener-Hooker NJ (2009). Microscale methods
for high-throughput chromatography development in the
pharmaceutical industry. J Chem Technol Biotechnol 84, 927–940.
5. Bergander T et al. (2008). High-throughput process development:
determination of dynamic binding capacity using microtiter
filter plates filled with chromatography resin. Biotechnol
Prog 24, 632–639.
6. Kelley BD et al. (2008). High-throughput screening of
chromatographic separations: IV. Ion-exchange. Biotechnol Bioeng
100, 950–963.
7. Bhambure R et al. (2011). High-throughput process development
for biopharmaceutical drug substances. Trends Biotechnol 29,
127–135.
8. Anurag SR (2009). Roadmap for implementation of quality by design
(QbD) for biotechnology products. Trends Biotechnol 27, 546–553.
9. Bergander T et al. (2008). High-throughput process development:
determination of dynamic binding capacity using microtiter filter
plates filled with chromatography resin. Biotechnol Prog 24,
632–639.
10. Carta G and Jungbauer A (2010). Process Chromatography:
Process Development and Scale-Up. 1st ed (Weinheim:
Wiley-VCH).
11. Guiochon G et al. (2006). Fundamentals of Preparative and
Nonlinear Chromatography. (Academic Press).
12. Taylor JR (1997). An introduction to Error Analysis: The study of
uncertainties in physical measurements. 2nd ed (University Science
Books).