Jeppesen JeppView 3 - Manual (Page 125)

JeppView User's Guide
128
The airport filtering criteria in the Display Filters tab coordinate with the airport
criteria in the Chart Preferences tab (also on the Properties dialog box) in the Nav
Data category, as well as some of the buttons on the Preferences toolbar.
Airports displayed in the Enroute Charts View (and controlled by the Display Filters
tab on the Properties dialog box) are from the Jeppesen Electronic Chart Data, while
airports displayed in the Airport List are from your JeppView subscription. Airport
filters on the Airport List do not determine the airports displayed in the Enroute
Charts View.
Obstacle Filters
Obstacle data is available in the VFR themes of the Enroute Charts view for reference
only. You can display or hide them by clicking the Obstacle button in the Preferences
toolbar. To set obstacle filters for those that have a measurement Above Ground
Level (AGL):
1. Right-click an open area in the Enroute Charts View, and choose Properties
from the shortcut menu.
2. Click the Display Filters tab in the chart Properties dialog box.
3. In the Obstacle Filters section, click the Height radial button and place the
minimum altitude for obstacles that you want to see. The measurement will
be in feet or meters depending on your distant measurement preference
(Tools > Options > Measurement).
4. Click Apply to view the changes.
CAUTION
The obstacle database is for reference only. Be cautious around
smaller airports where obstacle data might not be available or current.
Some obstacles display only Mean Sea Level (MSL)elevation and cannot be filtered.
See Also:
Customizing the Enroute Chart Themes
Enroute Chart Projections
Setting a Default Display
The default view refers to the enroute chart location and zoom level displayed in the
main window every time you open JeppView. When you first open JeppView, the
default view is the world. You can reset this view to display a different location upon
startup, and you can return to this default view at any time.
NOTE
A theme is not included in the default view. On startup, JeppView uses
the theme that you last viewed.
Changing the Enroute Chart Default View