Jeppesen JeppView 3 - Manual (Page 61)

JeppView User's Guide
64
5. Enter the User Name and Password only if the proxy server requires
authentication (this is fairly uncommon).
6. Select the check box associated with the desired configuration on the right-
hand side of the dialog box.
7. Click Close.
If you are using a SOCKS proxy server that proxies all communication to the
Internet:
1. Click New.
2. Select the SOCKS proxy type.
3. Enter the address:port where the SOCKS proxy resides on your network.
4. Enter the port ranging from 1-9999.
5. Select the check box associated with the desired configuration on the right-
hand side of the dialog box.
6. Click Close.
JeppView will look at the first proxy server entry in the list first and apply it to all
communications through the port entered, so enter the more specific ports first. If
you create more then one proxy entry, JeppView looks at each entry and uses the
selected protocol for all communications through the entered port.
Example:
The first entry tells JeppView to send all communication going out on port 80 using
an HTTP protocol through the proxy server at proxy.jeppesen.net port 8080.
The second entry tells JeppView to send all communications going out on all other
ports (1-1999) using SOCKS Version 4 protocol through a proxy server at
proxy.jepp.net port 890.
NOTE
If you are using an HTTP proxy, first try the standard HTTP proxy
protocol. If that doesn't work, try the HTTP Tunneling protocol. Within
JeppView, different communication types (graphic weather, flight plans,
interactive, etc.) use different ports for communication, so it is possible
for some of the functionality in JeppView to work without proxy support
enabled (or with only one proxy type enabled) while others do not.
NOTE
Although JeppView supports most proxy configurations, it is possible that
your proxy configuration is not compatible with JeppView. Please call
Jeppesen Technical Support for assistance if your proxy is not working
correctly. You need to know what type of proxy configuration you have.
Also, we have had mixed success with proxy servers that require
authentication.
Starting JeppView
To start JeppView, do one of the following: