Jeppesen JeppView 3 - Manual (Page 37)

JeppView User's Guide
40
D. In the Folder text box, enter \\<servername>\Jeppesen where
servername
is the name of the server where you installed the JeppView
program.
E. Select the Reconnect at logon check box.
F. Click Finish. You should now be able to access your network drive.
3. Start JeppView on the client.
4. Read the message that appears about using a network drive instead of a
network path, and then click OK.
5. JeppView shuts down and attempts to launch the NetworkCorrectionUtility.exe
program located in the \\<servername>\Jeppesen\\JeppView3\\Utils
folder. This utility assists in remapping your JeppView server location to a
network drive.
6. In the JeppView Network Correction Utility Welcome dialog box, click
Next.
7. Read the client/server setup instructions and ensure you have completed all
the steps listed before continuing. Click Next.