Jeppesen JeppView 3 - Manual (Page 243)

JeppView User's Guide
246
You can set the distance measurements used in JeppView to show values in the unit
type that you prefer.
The following is a list of JeppView features affected by the Distance, Speed,
Weight, Fuel, Temperature, and Pressure drop-down menus:
• Distance: Electronic Ruler , RoutePack Properties , Route Properties , Route
Leg Information on Chart , Minimum Runway Length Filter , Obstacle Filters ,
and Point and Click Routing .
• Speed: Not applicable in JeppView.
• Weight: Not applicable in JeppView.
• Fuel: Not applicable in JeppView.
• Temperature: Not applicable in JeppView.
• Pressure: Not applicable in JeppView.
Warnings Tab
Reset All Program Warnings resets any warnings that have been turned off, such
as the data currency warning that appears each time JeppView is opened.
Status Bar