Jeppesen JeppView 3 - Manual (Page 33)

JeppView User's Guide
36
The first installation of JeppView requires ECD Disc 1 and 2. Thereafter, update the
data every 14 days through the Internet or with the CD updates received in the mail.
To install your terminal charts, follow these steps:
1. Insert ECD Disc 1 into your computer CD-ROM drive. If the setup program
doesn’t start automatically, browse to your computer CD-ROM drive and
double-click setup.exe.
2. If you deactivated a JeppView 3 serial number, enter your new serial number
and click Next.
3. JeppView MFD Users Only: If this is your first time installing ECD Disc 1,
click Yes to install JSUM. JSUM is used to assist in transferring the electronic
chart data to the media used with your MFD system.
4. JeppView MFD Users Only : If applicable, select the Run Jeppesen
Services check box and click Next. This option launches the Jeppesen
Services Update Manager (JSUM) near the end of the ECD Disc 1 update. This
option is only available if JSUM is already installed.
5. Verify the terminal chart coverage(s) listed for your serial number are the
same as what you have purchased.
A. The first time that you install ECD Disc 1 on a given computer, you may
not see any coverages. If that occurs, a box for entering a coverage code
appears near the bottom of the Setup window.
B. Type the coverage codes from the front of your JeppView CD album
(below the serial number), and then click Apply.
NOTE
Coverage codes change with each terminal chart cycle. If the
coverage code you have no longer works, or you don’t have a
coverage code, or you don’t see the coverages you need after
entering your codes, have your order number or customer number
available and contact Jeppesen Customer Service. After you have the
codes you need, complete the steps outlined below.
6. JeppView MFD Users Only: The JSUM installer and program launches, and
you can log in and begin the programming process to your media. For JSUM
information, see the JSUM help file.
7. After the update is complete, continue the installation with ECD Disc 2.
Electronic Chart Data Disc 2
To receive JeppView and FliteDeck program updates, Jeppesen aeronautical data and
text data, follow these steps: