Jeppesen JeppView 3 - Manual (Page 221)

JeppView User's Guide
224
• Click File > Print > Print Terminal Chart or File > Print Preview
Terminal Chart while the terminal chart is displayed.
o
Click Print to print from the Print Preview window.
o
Click Close to exit the Print Preview window without printing.
Printing Multiple Terminal Charts
To print multiple terminal charts:
1. Select the terminal charts for the same airport by pressing the CTRL or SHIFT
key as you select them in the Airport List or RoutePack List. See Selecting
Multiple Charts .
2. Open the Printing [terminal chart] dialog box (Figure 6-2) by doing any of
the following:
• Right-click the selected terminal chart(s) and choose Print from the
shortcut menu.
• Click the Print drop-down menu on the Standard toolbar and select
Print '[Airport: chart]' in Airport List or Print '[Airport,...]' in
RoutePack List.
• Click File > Print > Print [Airport...] in Airport List or Print
[Airport: terminal] in RoutePack List.
3. Select the Page Settings options.
4. When no selection is made, JeppView prints charts scaled to fill an entire
page. To print in single-page mode, clear the Two per page check box.
• Two per page prints two charts on each page, maximizing each chart
on its half of the page, in one of four ways:
o
Kneeboard prints with standard margins, designed for use with
chart clipboards.