Jeppesen JeppView 3 - Manual (Page 32)

Installation and Activation
35
IMPORTANT
Accept the license agreement. Because JeppView is designed
to be used on a combination of home, office, laptop, and
aircraft computers, the license agreement allows you to
install the JeppView and FliteDeck components on various
combinations of up to four computers for your own personal
use. Under no circumstances should this software be used by
more than one person at the same time.
4. In the Pilot Information dialog box, enter your name and 16-character or
alphanumeric serial number from the front of your CD album, and then click
Next.
5. Select the programs to install. You can install JeppView, FliteDeck or both.
6. Select the path in which to install JeppView and FliteDeck and click Next.
Jeppesen recommends that you use the default folder or a location where
other Jeppesen programs have previously been installed. If you want to use a
different drive or folder, click Change, and then type the path or browse to
the folder that you want.
7. Click Next through the remaining screens, accepting all default options.
8. When the installation is complete, click Finish. A dialog box appears
instructing you to insert ECD Disc 1. If your computer requires a reboot, do so
before moving to the next procedure.
Existing Users Start Here
If you changed your JeppView subscription to update your MFD system, or are
currently using JeppView v3 with a different serial number, you must deactivate your
current version. After you have deactivated JeppView, you will be provided the
opportunity to insert your new JeppView serial number. You do not need the
program CD.
To deactivate JeppView:
1. Open the JeppView program folder (the default location is
C:\Jeppesen\JeppView3
).
2. Double-click deactivate.exe.
3. If prompted, select JeppView and click OK.
4. Select the check box to continue and click Next.
5. Click Yes to deactivate JeppView.
6. Select a deactivation process (we recommend that you select the Internet
(Automated) method if you have an Internet connection), and click Next.
7. Record your serial number and deactivation code, and click Finish.
8. Insert ECD Disc 1 and complete the installation.
Electronic Chart Data Disc 1