Jeppesen JeppView 3 - Manual (Page 82)

Using the Enroute Chart
85
RoutePack Overview
A RoutePack is like an electronic briefcase that contains flight information for one or
more routes with their associated airport and terminal charts, as well as a collection
of commonly used airports, charts, and routes. RoutePacks can be saved,
unloaded,
and loaded back into JeppView for future use. JeppView offers you the flexibility to
create RoutePacks that accommodate your specific charting needs.
Using RoutePacks, you can:
• Create entire routes, including multi-leg routes, and save them for future use.
• Print enroute and terminal charts for one or multiple routes.
• Add waypoints, including airports and navaids, to a route.
• Delete unused or unnecessary terminal charts for a particular route or phase
of flight.
• Add alternate airports and routes departing from any point in a main route.
• Add, view, and print non-route airport data and terminal charts in the Other
Charts folder of a RoutePack.
• Save time by creating and sharing RoutePacks between multiple Jeppesen
products (JeppView, JetPlanner, FliteDeck and FliteStar) that also use
RoutePacks.
See also:
Route Planning
Creating RoutePacks and Routes
Editing Routes
Multiple Select
The multiple select feature enables you to select more than one airport, terminal
chart, or route when you want to copy, paste, delete, move, save, and print.