Dell PowerVault 50F (Fibre Channel Switch) User Manual
Page 46
PowerVault™ 50F Commands: Dell™ PowerVault™ 50F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide
file:///C|/Users/sharon_anand/Desktop/PowerVault/50f_enit/COMMANDS.HTM[3/15/2013 11:32:02 AM]
date
Figure 7-4 shows the date command, when entered by itself, displays the system date and time. You can
also set the date as follows:
1. Type the command followed by the date in the format mmddHHMMyy where:
— mm is month
— dd is date
— HH is hour
— MM is minutes
— yy is year
2. Press <Enter> to set date and time.
NOTE:
The date function does not support daylight saving time. The firmware is year 2000 compliant.
Figure 7-4. date Command Example
dateShow
Figure 7-5 shows the dateShow command which prints system and firmware dates. The fields are described
in Table 7-2.
Figure 7-5. dateShow Command Example
Table 7-2. dateShow Command Field Descriptions
Fabric Element
Description