Dell PowerVault DL2000 - Manual (Page 13)

Unconfigured Virtual Disks Cannot Be Deleted From The Backup Exec Console
Description Backup Exec continues to display an unconfigured virtual disk until the virtual disk is removed
from the system.
Workaround/Solution If the virtual disk is no longer required, use Server Administrator to initialize and delete the
unused virtual disk.
Simultaneous Multiple Deduplication Backup Jobs Fail To Complete
NOTE: Applies to your Dell DL2000 and DL2100 systems.
Description When multiple deduplication backup jobs are scheduled to run simultaneously, their Job Status in
the Job Monitor window is displayed as queued and they fail to complete.
Workaround/
Solution Perform one of the following:
• Ensure that the appliance is up to date by running Symantec LiveUpdate.
• Reduce the number of deduplication backup jobs scheduled to run at the same time.
Backup Exec Console Displays A Message
NOTE: Applies to your Dell DL2000 and DL2100 systems.
Description The Backup Exec Console stops responding and displays a message: Collection Was
Modified; Enumeration Operation May Not Execute. This does not affect
configured or running backup jobs.
Workaround/
Solution Use the Windows Task Manager to locate and end the Backup Exec Console application. Ensure
that the appliance is up to date by running Symantec LiveUpdate.
System Stops Responding
NOTE: Applies to your Dell DL2000 and DL2100 systems.
Description When the appliance is configured with NIC teaming, non-paged pool utilization continues to
increase until the system hangs.
Workaround/Solution Update the Broadcom teaming driver contained in the Broadcom NetXtreme II Family of
Adapters driver to 14.1.5 or later.
Server Administrator 6.2 Stops Responding
NOTE: Applies to your Dell DL2000 and DL2100 systems.
Description The Server Administrator DSM SA Data Manager stops and the user interface stops
responding.
13