So that you can restore the correct settings in, Step 7 – Dell Inspiron One 2305 (Mid 2010) User Manual
Page 24
Advertising
3.
Replace the system-board shield (see
Replacing the System-Board Shield
).
4.
Follow the instructions from
step 4
to
step 5
in
Replacing the Front Stand
.
5.
Replace the back cover (see
Replacing the Back Cover
).
6.
Connect your computer and devices to electrical outlets, and then turn them on.
7.
Enter the system setup utility (see
System Setup Utility
) and restore the settings you recorded in
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Advertising