Dell Inspiron One 2305 (Mid 2010) User Manual
Page 50
4.
Place the memory-module cover on the system-board shield and slide the memory-module cover into place.
5.
Tighten the screw that secures the memory-module cover to the system-board shield.
6.
Replace the back cover (see
Replacing the Back Cover
).
7.
Follow the instructions from
step 4
to
step 5
in
Replacing the Front Stand
.
8.
Connect your computer and all attached devices to electrical outlets, and then turn them on.
9.
When the message appears stating that memory size has changed, press <F1> to continue.
10.
Log on to your computer.
To verify that the memory is installed correctly, click Start
®
Control Panel®
System and Security® System.
Check the amount of memory (RAM) listed.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.