Touch screen control card (optional), Removing the touch screen control card, Replacing the touch screen control card – Dell Inspiron One 2305 (Mid 2010) User Manual

Page 31

Advertising
background image

Back to Contents Page

 

Touch Screen Control Card (Optional)

Dell™ Inspiron™ One 2305/2310 Service Manual 

  

Removing the Touch Screen Control Card

  

Replacing the Touch Screen Control Card

 

 

 

Removing the Touch Screen Control Card

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Remove the back cover (see

Removing the Back Cover

).


 

3.

Remove the two screws that secure the touch screen control card to the chassis.

 

4.

Disconnect the cables from the connectors on the touch screen control card.

 

5.

Lift the touch screen control card away from the chassis.

 

Replacing the Touch Screen Control Card

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Align the screw holes on the touch screen control card with the screw holes on the chassis.

 

3.

Replace the two screws that secure the touch screen control card to the chassis.

 

4.

Connect the cables to the connectors on the touch screen control card.

 

5.

Replace the back cover (see

Replacing the Back Cover

).

 

 

6.

Connect your computer and all attached devices to electrical outlets, and turn them on.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

1

touch screen control card

2

screws (2)

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Advertising