Dell Inspiron One 2305 (Mid 2010) - Manual (Page 28)

Replacing the Display Cable
1. Follow the instructions in Before You Begin .
2. Connect the display cable to the connector on the display panel.
3. Turn the display panel over.
4. Replace the display panel (see Replacing the Display Panel ).
5. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
1 display cable 2 display cable connector
3 pull tab
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.