Dell Inspiron One 2305 (Mid 2010) User Manual
Page 40
Advertising
4.
Adhere the silver foil on the processor heat-sink.
5.
Connect the processor heat-sink fan cable to the connector (CPU FAN) on the system board.
6.
Replace the system-board shield (see
Replacing the System-Board Shield
).
7.
Follow the instructions from
step 4
to
step 5
in
Replacing the Front Stand
.
8.
Replace the back cover (see
Replacing the Back Cover
).
9.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Advertising