Dell Inspiron One 2305 (Mid 2010) - Manual (Page 60)

Inspiron One 2310
a. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
b. Lift the processor from the ZIF socket; place it aside in a safe and secure place. .
Replacing the Processor
1. Follow the instructions in Before You Begin .
2. Unpack and replace new processor:
Inspiron One 2305
a. Lift the release lever to the release position so that the processor socket is ready for the new processor.
b. Ensure that the release lever on the processor socket is fully extended.
c. Align the pin-1 corners of the processor and processor socket.
3 processor socket
1 ZIF socket 2 processor
3 ZIF-socket cam screw
CAUTION: Ground yourself by touching an unpainted metal surface or the computer stand.
1 processor socket 2 processor pin-1 indicator
3 processor 4 release lever
CAUTION: Socket pins are delicate. To avoid damage, ensure that the processor is aligned properly with the processor socket, and do not use
excessive force when you install the processor. Be careful not to touch or bend the pins on the system board.
CAUTION: You must position the processor correctly in the processor socket to avoid permanent damage to the processor.