Processor, Removing the processor – Dell Inspiron One 2305 (Mid 2010) User Manual
Page 59
Back to Contents Page
Processor
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the Processor
1.
Follow the instructions in
Before You Begin
.
2.
Remove the back cover (see
Removing the Back Cover
).
3.
Follow the instructions from
step 2
to
step 5
in
Removing the Front Stand
.
4.
Remove the system-board shield (see
Removing the System-Board Shield
).
5.
Remove the MXM-assembly fan (see
Removing the MXM-Assembly Fan
).
6.
Remove the MXM assembly (see
Removing the MXM Assembly
).
7.
Remove the processor heat-sink fan (see
Removing the Processor Heat-Sink Fan
).
8.
Remove the processor heat-sink (see
Removing the Processor Heat Sink
).
9.
Remove the processor:
Inspiron One 2305
a.
Press and push the release lever down and out to release it from the tab that secures it.
b.
Lift the processor to remove it from the processor socket; place it aside in a safe and secure place.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
When removing or replacing the processor, do not touch any of the pins inside the processor socket or allow any objects to fall on the
pins in the processor socket.
1 processor 2 release lever