Dell Inspiron One 2305 (Mid 2010) - Manual (Page 36)

Replacing the Hard Drive
1. Follow the instructions in Before You Begin .
2. Place the hard-drive cage on the hard drive, and align the screw holes on the hard-drive cage with the screw holes on the hard drive.
3. Replace the four screws that secure the hard-drive cage to the hard drive.
4. Connect the power and data cables to the connectors on the hard drive.
5. Place the hard-drive assembly on the chassis and slide the hard-drive assembly into place.
6. Tighten the two captive screws that secure the hard-drive assembly to the chassis.
7. Replace the back cover (see Replacing the Back Cover ).
8. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
1 screws (4) 2 hard-drive cage
3 hard drive
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.