Infrared card, Removing the infrared card, Replacing the infrared card – Dell Inspiron One 2305 (Mid 2010) User Manual
Page 45
Back to Contents Page
Infrared Card
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the Infrared Card
1.
Follow the procedures in
Before You Begin
.
2.
Remove the system board (see
Removing the System Board
).
3.
Follow the instructions from
step 5
to
step 11
in
Removing the Display Bezel
.
4.
Turn the display bezel over.
5.
Remove the screw that secures the infrared card to the display bezel.
6.
Disconnect the infrared-card cable from the connector on the infrared card.
7.
Lift the infrared card away from the display bezel.
Replacing the Infrared Card
1.
Follow the instructions in
Before You Begin
.
2.
Connect the infrared-card cable to the connector on the infrared card.
3.
Align the screw holes on the infrared card with the screw holes on the display bezel.
4.
Replace the screw that secure the infrared card to the display bezel.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
1
infrared card
2
screw
3
infrared-card cable connector