Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 20)

for information about enabling the AppleTalk and NCP protocols.
8. Use the protocol tabs to configure the specific properties of each type of share.
NOTE: Services for NetWare (SFN) are compatible with the Novell NetWare Bindery service for authentication
and file access using the Internetwork Packet Exchange/Sequenced Packet Exchange (IPX/SPX) network protocol.
You must perform a NetWare logon to the NAS system using a NetWare client before you can connect to the
NetWare shares.
9. Click OK.
Modifying Share Properties
1. Log in to the NAS Manager.
2. Click Shares.
3. On the Shares page, click Shares.
4. In the Shared Folders table, click the share you want to modify.
5. Click Properties.
The Share Properties page displays. Use this page to change the description of the share. You can also select the
type of client from which the share is accessible.
6. Click OK.
Removing a Share
When you remove a share, access to the share is removed; however, the actual files remain on the NAS system.
To remove a share, perform the following steps:
1. Log in to the NAS Manager.
2. Click Shares.
3. On the Shares page, click Shares.
4. In the Shared Folders table, click the share that you want to delete.
5. Click Delete.
A confirmation dialog appears.
6. Click OK to confirm the deletion, or click Cancel to keep the share.
Removing a Protocol From the Share
Because a share may have more than one protocol assigned, it is possible to remove a protocol from a share without
removing the remaining protocols.
To remove one or more specific protocols from a share, perform the following steps:
1. Log in to the NAS Manager.
2. Click Shares.