Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 65)

1. Insert the ARCserve 2000 CD in the CD drive of the client system.
The CD starts the installation automatically.
2. If the installation does not start automatically, open Windows Explorer, right-click the CD drive that contains the
ARCserve 2000 software, and select Autoplay from the menu.
The ARCserve 2000 Product Explorer window displays.
3. Follow the instructions in the documentation that came with your backup software to complete the installation.
Using ARCserve 2000 Remote Manager
1. On the client system, click the Start button, and then point to Programs ®
ARCserve ® ARCserve Manager.
The ARCserve Quick Access window displays.
The ARCserve Quick Access window provides wizards for many common backup tasks. You can use these wizards or
go through the standard menus to perform your backup tasks.
2. Enter the name of the NAS system in the Server field at the top of the screen to manage the backup software on the
NAS system.
You can manage all your backup operations from this application, just as you would manage them from the local application.
See the ARCserve 2000 documentation for more information on using the software.
Installing Tape Device Drivers for Windows 2000 Backup and
Recovery Tools
If you are using Windows 2000 Backup and Recovery Tools, you might need to install drivers for both tape drives and tape
media changers.
NOTE: Most of the tape device drivers are located in the c:\dell\drivers directory. However, you should always check
the Dell | Support website at support.dell.com for updated drivers and patches.
Installing Drivers for Dell™ PowerVault™ Tape Drives
1. Connect the PowerVault tape drive, and then restart the system.
2. Log in to the NAS Manager.
3. Click Maintenance.
4. Click Terminal Services.
5. Log in to a Terminal Services Client session.
6. On the Advanced Administration Menu under System Management, click Computer Management.
NOTE: If the Advanced Administration Menu does not display, double-click the Advanced Administration Menu
icon on the desktop of the NAS system.
7. Click Computer Management in the left pane.
8. Click System Tools in the left pane.