Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 84)

1. Copy your files to a dynamic volume.
2. Take a persistent image of this dynamic volume.
For information about taking a persistent image, see " Using Persistent Images ."
3. Extend the dynamic volume.
For information about extending a volume, see " Extending a Dynamic Simple or Spanned Volume ."
4. Delete the files on the extended volume.
5. Take another persistent image of the dynamic volume.
6. Revert to (or restore) the original persistent image you took in step 2.
For information about restoring a persistent image, see " Restoring Volumes From an Existing Persistent Image ."
7. Run reextend.exe with the drive letter that needs extension by using the syntax reextend –L:<driveletter>.
For example, type reextend –L:g, where g is the drive to be reextended.
The reextend.exe file is located in the c:\WINNT\system32\ServerAppliance directory.
8. Use the Dir command to prove that the total size and free space has expanded.
9. Compare files from the reverted and reextended dynamic volume to the original persistent image of the volume.
Changing the Dell ActiveArchive Event Log Language
Applying a selected language changes the graphical user interface to that language, but it does not change the language in
which the Dell ActiveArchive event log messages are generated. The messages are generated in English unless you run a
batch file to change the language to one of the following supported languages:
English
French
German
Japanese
Spanish
To change the language in which the event log messages are generated, perform the following steps:
1. Log in to the NAS Manager.
2. Click Maintenance.
3. Click Terminal Services.
4. Log in to the system as administrator.
5. If the Advanced Administration Menu is open, click Exit, and then OK to close it.
6. Open the Microsoft Windows Explorer, expand the hard drive C directory and the Dell directory.
7. Open the AArchive_Langpatch directory.
8. Double-click the appropriate batch file, such as the english.bat file for English or the japanese.bat file for Japanese.