Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 66)

9. Click Device Manager in the left pane.
10. Click Unknown Devices in the right pane.
NOTE: The tape device may also appear under Other Devices.
11. Double-click the tape device.
12. Click the Driver tab.
13. Click Update Driver.
The Upgrade Device Driver Wizard displays.
14. Click the radio button next to Search for a suitable driver for my device (recommended), and then click Next.
15. In Optional search locations, click the check box next to Specify a location, and deselect the other check boxes.
16. Click Next.
17. In the path for Copy manufacturer's files from, specify the folder name that contains the device drivers.
18. Click OK, and then click Next.
The Upgrade Device Driver Wizard searches the specified folder for the driver files.
19. Make sure that the wizard has selected the appropriate PowerVault tape device, and then click Next.
20. Click Finish.
21. Click Close to exit the driver properties dialog box.
Installing Drivers for PowerVault Tape Drive Media Changers
To install drivers for tape media changers when using Windows 2000 Backup and Recovery Tools, perform the following steps:
1. Connect the PowerVault tape device, and then restart the NAS system.
2. Log in to the NAS Manager.
3. Click Maintenance.
4. Click Terminal Services.
5. Log in to a Terminal Services Client session.
6. In the Advanced Administration Menu, click System Management, and then click Computer Management.
NOTE: If the Advanced Administration Menu does not display, double-click the Advanced Administration Menu
icon on the desktop of the NAS system.
7. Click Computer Management in the left pane, and then click System Tools.
8. Click Device Manager in the left pane.
9. Click Medium Changers in the right pane.
10. Double-click Unknown Medium Changer.
11. Click Driver tab in the Properties window.