Dell C1765NFW MFP Laser Printer - Manual (Page 147)

Understanding the Tool Box Menus 145
Fax Settings
Purpose:
To display the basic fax settings.
Values:
Receive Mode Displays the fax receiving mode.
Auto Rec Fax Displays the interval at which the printer goes into the fax receive mode after
receiving an incoming call.
Auto Rec Fax/Tel Displays the interval at which the printer goes into the fax receive mode after the
external telephone receives an incoming call.
Auto Rec Ans/Fax Displays the interval at which the printer goes into the fax receive mode after the
external answering machine receives an incoming call.
Line Monitor Displays the volume of the line monitor, which audibly monitors a transmission
through the internal speaker until a connection is made.
Ring Tone Volume Displays the volume of the ring tone, which indicates that an incoming call is a
telephone call through the internal speaker when Receive Mode is set to
Telephone/Fax.
Line Type Displays the line type.
Tone/Pulse Displays the dialing type.
Resend Delay Displays the interval between transmission attempts.
Redial Attempts Displays the number of redial attempts.
Redial Delay Displays the interval between redial attempts.
Junk Fax Setup Displays whether to reject faxes sent from unwanted numbers.
Remote Receive Displays whether to receive faxes by pressing a remote receive code on the external
telephone.
Remote Rcv Tone Displays the remote receive code to start Remote Receive.
Fax Header Displays whether to print the information of sender on the header of faxes.
Fax Header Name Displays the name of sender to be printed on the header of faxes.
Fax Number Displays the fax number to be printed on the header of faxes.
Fax Cover Page Displays whether to attach a cover page to faxes.
DRPD Pattern Displays the Distinctive Ring Pattern Detection (DRPD) setting.
Sent Fax Fwd Displays whether to forward incoming faxes to a specified destination.
Fax Fwd Number Displays the fax number of the destination to which incoming faxes are to be
forwarded.
Prefix Dial Displays whether to set a prefix dial number.
Prefix Dial Num Displays a prefix dial number. This number dials before any auto dial number is
started.
Discard Size Displays whether to discard text or images at the bottom of a fax page when the
entire page does not fit onto the output paper.
ECM Displays whether to enable the Error Correction Mode (ECM).
Modem Speed Displays the fax modem speed when a fax transmission or reception error occurs.
Fax Activity Displays whether to automatically print a fax activity report after every 50
incoming and outgoing fax communications.