Dell C1765NFW MFP Laser Printer - Manual (Page 174)

172 Understanding the Printer Menus
Fax Defaults
Use the Fax Defaults menus to configure a variety of fax features.
NOTE: The FAX service cannot be used unless you set up a country code under Country . If Country is not set up, a
message Set The Country Code appears on the display.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Resolution
Purpose:
To specify the resolution level to be used for fax transmission.
Values:
NOTE: Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving device.
Original Type
Purpose:
To select the default document type.
Values:
Lighter/Darker
Purpose:
To set the default copy density level.
Values:
Standard* Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or documents printed using a dot-matrix
printer.
Super Fine Suitable for documents containing extremely fine detail. The Super Fine mode is enabled only if the
remote machine also supports the super fine resolution. See the notes below.
Ultra Fine Suitable for documents containing photographic images.
Text* Suitable for documents with text.
Photo Suitable for documents with photos.
Lighter2 Makes the fax lighter than the original. Works well with dark print.
Lighter1
Normal*
Works well with standard typed or printed documents.
Darker1 Makes the fax darker than the original. Works well with light print or faint pencil markings.
Darker2