Dell C1765NFW MFP Laser Printer - Manual (Page 327)

Maintaining Your Printer 325
3 Clean the CTD sensor inside the printer with a clean dry cotton swab.
4 Close the rear cover.
5 Turn on the printer.
Adjusting Color Registration
This section describes how to adjust the color registration when you first install the printer or after moving it to a
new location.
NOTE: A password is required to enter the Admin Menu menu when Panel Lock Set is set to Enable . In this case,
enter the password you specified, and press the (Set) button.
Performing Auto Adjust
Auto Adjust allows you to correct the color registration automatically.
The Operator Panel
1 Press the (Menu) button.
2 Press the button until System is highlighted, and then press the (Set) button.
3 Press the button until Admin Menu is highlighted, and then press the (Set) button.
4 Press the button until Maintenance is highlighted, and then press the (Set) button.
5 Press the button until Adjust ColorRegi is highlighted, and then press the (Set) button.
6 Ensure that Auto Adjust is highlighted, and then press the (Set) button.