Dell C1765NFW MFP Laser Printer User Manual
Page 69
Installing Printer Drivers on Computers Running Windows
®
67
8 Click OK.
9 Select your printer name and click Next.
10 To change the printer name, enter the printer name in the Printer name box.
To use this printer as the default printer, select the
Set as the default printer check box. Click Next.
Installation starts.
11 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer
so that others on your network can find and use it. Click Next.
12 As the driver installation is completed, click Print a test page to print a test page.
13 Click Finish.
Windows 7, Windows 7 64-bit Edition, or Windows Server 2008 R2
1 Extract the zip file you downloaded to your desired location.
2 Click Start → Devices and Printers.
3 Click Add a printer.
4 When you use Windows Server 2008 R2, click Add a local or network printer as an administrator.
If the
User Account Control dialog box appears, click Yes.
NOTE:
If you are an administrator on the computer, click Yes; otherwise, contact your administrator to continue the desired
action.
5 Click Add a local printer.
6 Select the port connected to this product, and then click Next.
7 Click Have Disk to display the Install From Disk dialog box.
8 Click Browse, and then select the extracted folder in step 1.
9 Click OK.
10 Select your printer name and click Next.
11 To change the printer name, enter the printer name in the Printer name box, and then click Next.
Installation starts.
12 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer
so that others on your network can find and use it. Click Next.
13 As the driver installation is completed, click Print a test page to print a test page. To use this printer as the default
printer, select the Set as the default printer check box.
14 Click Finish.
Windows 8, Windows 8 64-bit Edition, Windows 8.1, Windows 8.1 64-bit Edition, Windows Server 2012, or Windows Server
2012 R2
1 Extract the zip file you downloaded to your desired location.
2 Right-click the bottom left corner of the screen, and then click Control Panel.
3 Click Hardware and Sound (Hardware for Windows Server 2012 and Windows Server 2012 R2) → Devices and
Printers → Add a printer.
4 Click Have Disk to display the Install From Disk dialog box.
5 Click Browse, and then select the extracted folder in step 1.
6 Click OK.