Dell C1765NFW MFP Laser Printer User Manual
Page 43
Connecting Your Printer
41
Manual SSID Setup
NOTE:
A password is required to enter
Admin Menu
when
Panel Lock Set
is set to
Enable
. In this case, enter the
password you specified, and press the
(Set) button.
1 Press the
(Menu) button.
2 Press the
button until System appears, and then press the
(Set) button.
3 Press the
button until Admin Menu appears, and then press the
(Set) button.
4 Press the
button until Network appears, and then press the
(Set) button.
5 Press the
button until Wireless Setup appears, and then press the
(Set) button.
6 Press the
button until Manual Setup appears, and then press the
(Set) button.
7 Enter the SSID, and then press the
(Set) button.
8 Select the network mode from Infrastructure and Ad-hoc depending on your environment, and then press
the
(Set) button.
If you select Infrastructure, proceed to step 9.
If you select Ad-hoc, proceed to step 10.
9 Select the encryption type from No Security, Mixed mode PSK, WPA-PSK-TKIP, WPA2-PSK-AES, or
WEP.
If you do not set security for your wireless network:
• Press the
button until No Security appears, and then press the
(Set) button.
To use Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES encryption:
a
Press the
button until Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES appears, and then
press the
(Set) button.
b
Enter the passphrase, and then press the
(Set) button.
NOTE:
A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric
characters. It may be described as a key on some access points or routers. For details, refer to the manual supplied with
the access point or router.
To use WEP encryption:
a
Press the
button until WEP appears, and then press the
(Set) button.
b
Enter the WEP key, and then press the
(Set)button.
c
Press the
button to highlight the desired transmit key from WEP Key 1 to WEP Key 4, and then press
the
(Set) button.
Proceed to step 11.
10 Select the encryption type from No Security or WEP.
If you do not set security for your wireless network:
• Ensure that No Security appears, and then press the
(Set) button.
To use WEP encryption:
a
Press the
button until WEP appears, and then press the
(Set) button.
b
Enter the WEP key, and then press the
(Set) button.
c
Press the
button to highlight the desired transmit key from WEP Key 1 to WEP Key 4, and then press
the
(Set) button.
11 The Restart System screen appears and the printer is rebooted, wireless LAN connection setting is completed.