Dell C1765NFW MFP Laser Printer - Manual (Page 185)

Understanding the Printer Menus 183
Resend Delay
Purpose:
To specify the interval between transmission attempts within the range of 3 to 255 seconds. The default is 8 seconds.
Redial Attempts
Purpose:
To specify the number of redial attempts to make when the destination fax number is busy, within the range of 0 to
9. If you enter 0, the printer will not redial. The default is 3.
Redial Delay
Purpose:
To specify the interval between redial attempts within the range of 1 to 15 minutes. The default is 1 minute.
Junk Fax Setup
Purpose:
To reject faxes sent from unwanted numbers by accepting faxes only from the fax numbers registered in the Phone
Book.
Values:
NOTE: Ensure to specify Fax Number before using Junk Fax Setup .
Remote Receive
Purpose:
To receive a fax by pressing a remote receive code on the external telephone after picking up the handset of the
telephone.
Values:
Remote Rcv Tone
Purpose:
To specify the remote receive code in two digits to start Remote Receive.
Off* Does not reject faxes sent from unwanted numbers.
On Rejects faxes sent from unwanted numbers.
Off* Does not receive a fax by pressing a remote receive code on the external telephone.
On Receives a fax by pressing a remote receive code on the external telephone.