Dell C1765NFW MFP Laser Printer - Manual (Page 153)

Understanding the Tool Box Menus 151
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are
performed by specifying the altitude of the location where the printer is being used.
NOTE: An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner.
Values:
Reset Defaults
Purpose:
To initialize NVM (non-volatile memory) for system parameters or Address Book data. After executing this function
and rebooting the printer, the menu parameters or data are reset to their default values.
For details, see "Resetting Defaults" on page 162.
Values:
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
NOTE: Using non-Dell-brand toner cartridges may make some printer features unusable, reduce print quality and decrease the
reliability of your printer. Dell recommends only new Dell-brand toner cartridges for your printer. Dell does not provide warranty
coverage for problems caused by using accessories, parts, or components not supplied by Dell.
NOTE: Before you use toner cartridge of another manufacturer, be sure to restart the printer.
Values:
0 meter Specifies the altitude of the location where the printer is installed.
1000 meters
2000 meters
3000 meters
Apply New Settings
After you complete the settings, click Apply New Settings to apply the changes.
System Section Click to initialize the system parameters.
User Fax Section Click to initialize the fax number entries in the Address Book.
User Scan Section Click to initialize the e-mail and server address entries in the Address Book.
Non-Dell Toner Off Does not use toner cartridge of another manufacturer.
On Uses toner cartridge of another manufacturer.
Apply New Settings After you complete the settings, click Apply New Settings to apply the changes.