Dell C1765NFW MFP Laser Printer - Manual (Page 162)

160 Understanding the Tool Box Menus
Redial Delay Available Range:
1–15 minutes
Specifies the interval between redial attempts.
Junk Fax Setup Off Does not reject faxes sent from unwanted numbers.
On Rejects faxes sent from unwanted numbers by accepting faxes only from the fax
numbers registered in the Phone Book.
Remote Receive Off Disables the remote receive feature.
On Receives a fax by pressing a remote receive code on the external telephone after
picking up the handset of the telephone.
Remote Rcv Tone Available Range:
00–99
Specifies the remote receive code in two digits to start Remote Receive.
Fax Header On Prints the information of sender on the header of faxes.
Off Does not print the information of sender on the header of faxes.
Fax Header Name Sets the name of sender to be printed on the header of faxes. Up to 30
alphanumeric characters can be entered.
Fax Number Sets the fax number of the printer to be printed on the header of faxes.
Fax Cover Page Off Does not attach a cover page to faxes.
On Attaches a cover page to faxes.
DRPD Pattern Pattern1–7 Provides a separate number for faxing with a distinctive ring pattern.
Sent Fax Fwd Off Does not forward incoming faxes.
Forward Always forwards incoming faxes to a specified destination.
Print and Forward Always forwards incoming faxes to a specified destination and prints all forwarded
incoming faxes.
Fax Fwd Number Specifies the fax number of the destination to which incoming faxes will be
forwarded.
Prefix Dial Off Does not set a prefix dial number.
On Sets a prefix dial number.
Prefix Dial Num Sets a prefix dial number of up to five digits. This number dials before any auto
dial number is started. It is useful for accessing the Private Automatic Branch
Exchange (PABX).
Discard Size Off Prints any excess at the bottom of a fax page without discarding it.
On Discards any excess at the bottom of a fax page.
Auto Reduction Automatically reduces a fax page to fit it onto the output paper.
ECM On Enables the ECM. To use the ECM, the remote machines must also support the
ECM.
Off Disables the ECM.
Modem Speed 2.4 Specifies the fax modem speed when a fax transmission or reception error occurs.
4.8
9.6
14.4
33.6
Fax Activity Auto Print Automatically prints a fax activity report after every 50 incoming and outgoing fax
communications.
No Auto Print Does not automatically print a fax activity report.