Dell Latitude Cpi - Manual (Page 26)

20 Dell Latitude CP and CPi — Parts Removal and Replacement Guide

 
 

  /
  
1. Close the display.
2. Remove the twelve 5-mm screws securing the back cover:


Five screws on the underside of the back cover


One screw behind the docking connector door


Six screws on the face of the back cover
3. Close the docking connector door.
4. Remove the back cover assembly.
Grasp the right end of the back cover assembly firmly, and unsnap it from
the computer. Then disengage the left end of the back cover assembly.
5-mm screws (12)