Dell Latitude Cpi - Manual (Page 36)

30 Dell Latitude CP and CPi — Parts Removal and Replacement Guide
#
 
The following subsections describe how to remove an LCD panel.





1 9
$& 6 .  5$
7




1. Remove the display assembly bezel.
2. Remove the four silver 5-mm screws at the corners of the LCD panel.
3. Disconnect the LCD panel power cable from connector J2 on the LCD
inverter board.
4. Lift the left edge of the LCD panel far enough to gain access to the
the display-assembly interface cable connector on the underside of
the LCD panel.
5. Using the two pull-tabs, disconnect the display-assembly interface
cable from the LCD interface connector on the underside of the LCD
panel.

  
  1 2
3     2
 
/
&45513%    
  
    
    2
3
 
 
           
%

  )
 
6 
 % 
  ) 
6

 % 
  )
 
6   % 
  
)

LCD panel
LCD panel
power cable
connector J2
LCD inverter board
display-assembly top cover
interface cable
connector
interface cable
5-mm screws (4)
upper-left corner