Dell Latitude Cpi - Manual (Page 33)

Dell Latitude CP and CPi — Parts Removal and Replacement Guide 27
!
 

, $
  
1. Remove the palmrest assembly.
2. Remove the two 5-mm interface-cable grounding screws from the
display-assembly interface cable.
3. Disconnect the display-assembly interface cable from connector JP1
on the system board.
Grasp the grounding tabs and pull the connector straight up from the
system board.
4. Close the display, being careful not to damage the display interface
cable.
display-assembly
interface cable
display assembly
hinges (2)
5-mm screws (4)
display-assembly
interface-cable
grounding screws (2)