Dell Latitude Cpi - Manual (Page 37)

Dell Latitude CP and CPi — Parts Removal and Replacement Guide 31
NOTE: When replacing the LCD panel, ensure that the tabs on the
display-assembly EMI shield fit over the four LCD panel mounting bosses.
(This is necessary for adequate grounding of the LCD panel.)




2 9
$& 6 .  5$
7



1. Remove the display assembly bezel.
2. Remove the four silver 5-mm screws at the corners of the LCD panel.
3. Lift the upper edge of the LCD panel and pivot the panel up to gain
access to the LCD inverter board in the display-assembly top cover.
4. Remove the screw securing the LCD inverter board to the
display-assembly top cover.
5. Lift the LCD inverter board and inverter board shield far enough to
disconnect the LCD panel power cable.
6. Disconnect the display-assembly interface cable from the ZIF
connector on the underside of the LCD panel.
To disconnect the cable, carefully work the cable connector free from the
ZIF connector on the LCD panel. Do not pull on the LCD interface cable
itself.
LCD panel
LCD panel
power cable
LCD inverter
board shield LCD inverter board
display-assembly top cover
interface
cable connector
interface cable
5-mm screws (4)
magnet
holder