Touch-pad interface module – Dell Latitude Cpi User Manual
Page 29
Advertising
Dell Latitude CP and CPi — Parts Removal and Replacement Guide
23
%5.&! "!
1.
Remove the palmrest assembly.
2.
Turn the palmrest assembly upside down on a flat work surface.
3.
Remove the four 1.8-mm screws securing the touch-pad bracket.
4.
Carefully disconnect the touch-pad cable from ZIF connector J1 on
the touch-pad interface module.
To release the ZIF connector latch, use a fingernail to lift up the central
portion of the black plastic latch.
5.
Remove the touch-pad interface module from the palmrest.
palmrest assembly
touch-pad interface module
touch-pad cable
touch-pad bracket
1.8-mm screws (4)
interface cable connector J1
Advertising