Dell Latitude Cpi - Manual (Page 45)

Dell Latitude CP and CPi — Parts Removal and Replacement Guide 39



, !  ! 
1. Remove the palmrest assembly.
2. Remove the 5-mm screw securing the audio board shield.
3. Remove the audio board shield.
4. Disconnect the speaker wires and microphone wires from their
connectors on the audio board.
The connectors are fragile—do not pull on the wires to disconnect them.
5. Remove the audio board from the bottom case.
NOTE: When replacing the audio shield, ensure that the audio shield is
properly seated to prevent it from cutting into the speaker wires or interfering
with devices installed in the modular bay. (You can check this by temporarily
installing a device in the modular bay prior to reinstalling the palmrest
assembly.)
5-mm screw
audio board
audio shield
speaker wires