Dell XPS One 2710 (Mid 2012) - Manual (Page 127)

Removing the Middle Cover | 127
58 Removing the Middle Cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1 Remove the back cover. See "Removing the Back Cover" on page 19.
2 Remove the stand. See "Removing the Stand" on page 47.
3 Follow step 1 to step 2 in "Removing the Hard Drive" on page 51.
4 Remove the hard-drive cage. See"Removing the Hard-Drive Cage" on page 55.
5 Follow step 1 to step 2 in "Removing the Optical Drive" on page 27.
6 Remove the trim cover. See "Removing the Trim Cover" on page 87.
7 Remove the I/O panel. See "Removing the I/O Panel" on page 91.
8 Remove the system-board shield. See "Removing the System-Board Shield" on
page 31.
9 Remove the inner frame. See "Removing the Inner Frame" on page 95.
10 Follow step 1 to step 6 in "Removing the I/O-Board" on page 99.
11 Remove the processor heat-sink. See "Removing the Processor Heat-Sink" on
page 79.
12 Remove the processor heat-sink fan. See "Removing the Processor Heat-Sink Fan"
on page 75.
13 Remove the power-supply fan. See "Removing the Power-Supply Fan" on page 59.
14 Remove the power-supply unit. See "Removing the Power-Supply Unit" on page 35.
15 Remove the converter board. See "Removing the Converter Board" on page 23.
16 Follow step 1 to step 3 in "Removing the System Board" on page 111.
17 Remove the side I/O-board. See "Removing the Side I/O-Board" on page 123.
OM_Book.book Page 127 Friday, April 27, 2012 3:23 PM