Dell XPS One 2710 (Mid 2012) - Manual (Page 57)

Replacing the Hard-Drive Cage | 57
23 Replacing the Hard-Drive Cage
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the hard-drive cage with the screw holes on the
computer base.
2 Replace the screws that secure the hard-drive cage to the computer base.
Postrequisites
1 Follow step 2 to step 3 in "Replacing the Hard Drive" on page 53.
2 Replace the stand. See "Replacing the Stand" on page 49.
3 Replace the back cover. See "Replacing the Back Cover" on page 21.
OM_Book.book Page 57 Friday, April 27, 2012 3:23 PM