Dell XPS One 2710 (Mid 2012) - Manual (Page 59)

Removing the Power-Supply Fan | 59
24 Removing the Power-Supply Fan
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1 Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1 Lift the securing tab and disconnect the power-supply fan cable from the
power-supply unit.
2 Remove the screws that secure the power-supply fan to the computer base.
3 Gently lift the power-supply fan and ease the power-supply fan cable from
under the I/O-board assembly.
4 Lift the power-supply fan off the computer base.
1 power-supply fan 2 screws (2)
3 power-supply fan cable 4 securing tab
2
1
3
4
OM_Book.book Page 59 Friday, April 27, 2012 3:23 PM