Dell XPS One 2710 (Mid 2012) - Manual (Page 31)

Removing the System-Board Shield | 31
10 Removing the System-Board Shield
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1 Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1 Remove the screws that secure the system-board shield to the computer base.
2 Lift the system-board shield off the computer base.
1 screws (8) 2 system-board shield
2
1
OM_Book.book Page 31 Friday, April 27, 2012 3:23 PM