Removing the msata mini-card, Prerequisites, Procedure – Dell XPS One 2710 (Mid 2012) User Manual

Page 71

Advertising
background image

Removing the mSATA Mini-Card |

71

30

Removing the mSATA Mini-Card

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After
working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13
. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Prerequisites

1

Remove the back cover. See "Removing the Back Cover" on page 19.

2

Remove the system-board shield. See "Removing the System-Board Shield" on
page 31.

Procedure

1

Remove the screws that secure the mSATA mini-card to the system board.

2

Slide and remove the mSATA mini-card from the mSATA mini-card connector.

1

screws (2)

2

mSATA mini-card connector

3

mSATA mini-card

1

2

3

OM_Book.book Page 71 Friday, April 27, 2012 3:23 PM

Advertising