Dell XPS One 2710 (Mid 2012) - Manual (Page 39)

Removing the Memory Module(s) | 39
14 Removing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1 Remove the Back Cover. See "Removing the Back Cover" on page 19.
Procedure
1 Remove the screw that secures the memory-module shield to the system-board
shield.
2 Slide the memory-module shield toward the bottom of the computer to remove it
from the system-board shield.
1 memory-module shield 2 screw
3 system-board shield
1
2
3
OM_Book.book Page 39 Friday, April 27, 2012 3:23 PM