Dell XPS One 2710 (Mid 2012) - Manual (Page 61)

Replacing the Power-Supply Fan | 61
25 Replacing the Power-Supply Fan
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1 Route the power-supply fan cable under the I/O-board assembly and then connect
the power-supply fan cable to the power-supply unit.
2 Align the screw holes on the power-supply fan with the screw holes on the
computer base and replace the screws that secure the power-supply fan to the
computer base.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 21.
OM_Book.book Page 61 Friday, April 27, 2012 3:23 PM