After working inside your computer – Dell XPS One 2710 (Mid 2012) User Manual
Page 13
Advertising
After Working Inside Your Computer |
13
2
After Working Inside Your Computer
After you complete the replacement procedures, ensure the following:
•
Replace all screws and ensure that no stray screws remain inside your computer
•
Connect any external devices, cables, cards, and any other part(s) you removed
before working on your computer
•
Connect your computer and all attached devices to their electrical outlets
CAUTION: Before turning on your computer, replace all screws and ensure
that no stray screws remain inside the computer. Failure to do so may damage
your computer.
OM_Book.book Page 13 Friday, April 27, 2012 3:23 PM
Advertising