Dell DX6000G - Manual (Page 155)

Troubleshooting Your System 157
9 Open the system. See "Opening the System" on page 80.
10 Remove all processors except for processor 1. See "Removing a Processor"
on page 118.
11 Close the system. See "Closing the System" on page 81.
12 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
13 Run the appropriate online diagnostic test. See "Running the System
Diagnostics" on page 159.
If the test fails, the processor is faulty. See "Getting Help" on page 169.
14 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
15 Open the system. See "Opening the System" on page 80.
16 Replace processor 1 with processor 2. See "Installing a Processor" on
page 121.
17 Repeat step 11 through step 13.
If your system has more than two processors, continue installing and
testing each processor in the processor 1 slot until you determine the
faulty processor, and then replace the faulty processor. See "Getting Help"
on page 169.
If you have tested all the processors and the problem persists, the system
board is faulty. See "Getting Help" on page 169.
book.book Page 157 Wednesday, December 22, 2010 2:13 PM