Installing the integrated storage controller card – Dell DX6000G User Manual
Page 93
Installing System Components
93
Figure 3-9. Removing and Installing the Integrated Storage Controller Card
Installing the Integrated Storage Controller Card
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 80.
3 If installed, remove the expansion card. See "Removing an Expansion
4 Hold the card by its edges.
1
SAS data cable connector
2
storage controller card slot
3
expansion card riser
4
integrated storage controller card
5
release lever (blue)
2
1
3
4
5
book.book Page 93 Wednesday, December 22, 2010 2:13 PM