Dell KVM 2321DS - Manual (Page 117)

Managing Your Remote Console Switch Using the On-board Web Interface 101
6
Managing Your Remote Console
Switch Using the On-board Web
Interface
Once you have installed a new Remote Console Switch, you have the ability
to view and configure unit parameters, determine who has access and control
rights, view and control currently active video sessions, and execute a variety
of control functions such as rebooting and upgrading your Remote Console
Switch from the on-board web interface. The on-board web interface has four
tabs: Connections, Configure, Status, and Tools.
For how to launch the on-board web interface, see "Launching the On-board
Web Interface" on page 32. For information about the Connections tab, see
"Accessing Servers from the On-board Web Interface" on page 65.
NOTE: The on-board web interface is not supported on 2161DS Remote Console
Switches so switches of this model cannot be migrated. Use the Remote Console
Switch Software to manage 2161DS Remote Console Switches; see the Dell Remote
Console Switch Software User’s Guide or help for more information. All other
Remote Console Switches support the on-board web interface and may be
migrated. See "Migrating Remote Console Switches to the On-board Web Interface"
on page 135 for more information.
Migrating Switches from the Remote Console Switch Software
If you have an existing installation of Remote Console Switches that supports
the on-board web interface, you can migrate the switches from the Remote
Console Switch Software to the on-board web interface. To do so, following
the procedures in "Upgrading Firmware" on page 120, "Migrating Remote
Console Switches to the On-board Web Interface" on page 135, and "Using
the Resync Wizard" on page 137.
NOTICE: Once you migrate a Remote Console Switch, you will manage switches
using the on-board web interface instead of the Remote Console Switch Software
AMP. However, you can still use the Remote Console Switch Software to modify